Bộ lưu điện UPS APC SURT2000XLI
Mã sản phẩm | : Bộ lưu điện UPS APC SURT2000XLI |
Bảo Hành | : 24 tháng |
Xuất xứ | : |
Tình trạng | : Hàng mới 100% |
Giá sản phẩm | : Liên hệ |
(Giá trên chưa bao gồm thuế VAT) | |
Tặng kèm phụ kiện. | |
Số lượng mua | |
Đánh giá sao |
Bộ lưu điện UPS APC SURT2000XLI
Availability
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime Allows additional run time to be quickly added as needed.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Network manageable Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
SmartSlot Customize UPS capabilities with management cards.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial connectivity Provides management of the UPS via a serial port.
Adaptability
Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Audible alarms Provides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable Provides temporary battery power when the utility power is out.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output | |
Output Power Capacity | 1400 Watts / 2000 VA
|
Max Configurable Power | 1400 Watts / 2000 VA
|
Nominal Output Voltage | 230V |
Output Voltage Note | Configurable for 220 : 230 or 240 nominal output voltage
|
Output Voltage Distortion | Less than 3%
|
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
|
Other Output Voltages | 220, 240 |
Crest Factor | 3 : 1 |
Topology | Double Conversion Online
|
Waveform Type | Sine wave
|
Output Connections | (6) IEC 320 C13 |
Bypass | Built-in Bypass
|
Input | |
Nominal Input Voltage | 230V |
Input Frequency | 50/60 Hz +/- 5 Hz (auto sensing)
|
Input Connections | IEC-320 C20 |
Cord Length | 2.44 meters |
Input voltage range for main operations | 160 – 280V |
Input voltage adjustable range for mains operation | 100 – 280V |
Other Input Voltages | 220, 240 |
Batteries & Runtime | Battery Type |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
|
Included Battery Modules | 1 |
Typical recharge time | 4 hour(s)
|
Replacement Battery | RBC31 |
RBC™ Quantity | 1 |
Extended Run Options | APC Smart-UPS RT 2000VA 230V
|
Communications & Management | |
Interface Port(s) | DB-9 RS-232, SmartSlot
|
Available SmartSlot™ Interface Quantity | 1 |
Control panel | LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
|
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|
Emergency Power Off (EPO) | Optional |
Surge energy rating | 420 Joules
|
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
|
Physical | |
Maximum Height | 432.00 mm
|
Maximum Width | 85.00 mm
|
Maximum Depth | 483.00 mm
|
Rack Height | 2U |
Net Weight | 25.00 KG
|
Shipping Weight | 29.82 KG
|
Shipping Height | 286.00 mm
|
Shipping Width | 630.00 mm
|
Shipping Depth | 594.00 mm
|
Color | Black |
Units per Pallet | 6.00 |
Environmental | |
Operating Environment | 0 – 40 °C |
Operating Relative Humidity | 0 – 95% no% |
Operating Elevation | 0-3000 meters |
Storage Temperature | -20 – 50 °C |
Storage Relative Humidity | 0 – 95% no%
|
Storage Elevation | 0-15000 meters
|
Audible noise at 1 meter from surface of unit | 50.00 dBA
|
Online Thermal Dissipation | 543.00 BTU/hr
|
Protection Class | IP 20 |
Regulatory Approvals | C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, VDE
|
Standard Warranty | 2 years repair or replace, optional on-site warranties available, optional extended warranties available
|
RoHS | Compliant
|
Other Environmental Compliance | China RoHS
|
Sản phẩm liên quan
Bộ lưu điện UPS APC SUA2200RMI2U
Liên hệ
Bộ lưu điện UPS APC SURT10000XLI
Liên hệ
Bộ lưu điện UPS APC SMT2200RMI2U
Liên hệ