• Bộ lưu điện UPS APC SMT1000RMI2U

Bộ lưu điện UPS APC SMT1000RMI2U

Mã sản phẩm : Bộ lưu điện UPS APC SMT1000RMI2U
Bảo Hành : 24 tháng
Xuất xứ :
Tình trạng : Hàng mới 100%
Giá sản phẩm : Liên hệ
(Giá trên chưa bao gồm thuế VAT)
Tặng kèm phụ kiện.
Số lượng mua
Đánh giá sao Chia sẻ

Bộ lưu điện UPS APC SMT1000RMI2U

High online efficiency
Reduces utlility costs, generates less heat.
Green mode 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Cold-start capable
Provides temporary battery power when the utility power is out.
SmartSlot
Customize UPS capabilities with management cards.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Smart-UPS Features & Benefits

Availability
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Manageability
Network manageable
Provides remote power management of the UPS over the network.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Adaptability
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output
Output Power Capacity

700 Watts / 1000 VA

Max Configurable Power

700 Watts / 1000 VA

Nominal Output Voltage

230V

Output Voltage Note

Configurable for 220 : 230 or 240 nominal output voltage

Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
Other Output Voltages

220, 240

Topology

Line Interactive

Waveform Type

Sine wave

Output Connections

(4) IEC 320 C13
(2) IEC Jumpers

Input
Nominal Input Voltage

230V

Input Frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input Connections

IEC-320 C14

Input voltage range for main operations

160 – 286V

Input voltage adjustable range for mains operation

151 – 302V

Other Input Voltages

220, 240

Batteries & Runtime
Battery Type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

3 hour(s)

Replacement Battery

APCRBC132

RBC™ Quantity

1

Communications & Management
Interface Port(s)

RJ-45 Serial, SmartSlot, USB

Available SmartSlot™ Interface Quantity

1

Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)

Optional

Surge energy rating
459 Joules
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height

89.00 mm

Maximum Width
432.00 mm
Maximum Depth

457.00 mm

Rack Height

2U

Net Weight

28.18 KG

Shipping Weight

31.45 KG

Shipping Height

251.00 mm

Shipping Width

594.00 mm

Shipping Depth

603.00 mm

Color

Black

Units per Pallet

8.00

Environmental
Operating Environment

0 – 40 °C

Operating Relative Humidity

0 – 95%

Operating Elevation

0-3000 meters

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95%

Storage Elevation

0-15000 meters

Audible noise at 1 meter from surface of unit

45.00 dBA

Online Thermal Dissipation

56.00 BTU/hr

Regulatory Approvals

C-tick, EN 50091-1, EN 50091-2, GOST, VDE

Standard Warranty

3 years repair or replace (excluding battery) and 2 year for battery

RoHS

Compliant

REACH

REACH: Contains No SVHCs

Sản phẩm liên quan