Bộ lưu điện UPS APC SUA5000RMI5U
Mã sản phẩm | : Bộ lưu điện UPS APC SUA5000RMI5U |
Bảo Hành | : 24 tháng |
Xuất xứ | : |
Tình trạng | : Hàng mới 100% |
Giá sản phẩm | : Liên hệ |
(Giá trên chưa bao gồm thuế VAT) | |
Tặng kèm phụ kiện. | |
Số lượng mua | |
Đánh giá sao |
Bộ lưu điện UPS APC SUA5000RMI5U
Resettable circuit breakers Enables a quick recovery from overload events.
Boost and Trim Automatic Voltage Regulation (AVR) Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms Provides notification of changing utility power and UPS power conditions
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable Provides temporary battery power when the utility power is out.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable Provides remote power management of the UPS over the network.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity Provides management of the UPS via a serial port.
SmartSlot Customize UPS capabilities with management cards.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Smart-UPS Features & Benefits
Availability
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Manageability
Network manageable Provides remote power management of the UPS over the network.
Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial connectivity Provides management of the UPS via a serial port.
USB connectivity Provides management of the UPS via a USB port (not available on all models).
Disconnected battery notification Warns when a battery is not available to provide backup power.
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers Enables a quick recovery from overload events.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Adaptability
Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Safety
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output | |
Output Power Capacity | 4000 Watts / 5000 VA
|
Max Configurable Power | 4000 Watts / 5000 VA
|
Nominal Output Voltage | 230V
|
Output Voltage Note | Configurable for 220 : 230 or 240 nominal output voltage
|
Efficiency at Full Load | 96.0%
|
Output Voltage Distortion | Less than 5% at full load
|
Output Frequency (sync to mains) | 47 – 53 Hz for 50 Hz nominal
|
Other Output Voltages | 220, 240
|
Topology | Line Interactive
|
Waveform Type | Sine wave
|
Output Connections | (8) IEC 320 C13 |
Nominal Input Voltage | 230V
|
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing)
|
Input Connections | Hard Wire 3-wire |
Input voltage range for main operations | 160 – 286V
|
Input voltage adjustable range for mains operation | 151 – 302V |
Batteries & Runtime | |
Battery Type | VRLA
|
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC55 |
RBC™ Quantity | 2 |
Communications & Management | |
Interface Port(s) | DB-9 RS-232, SmartSlot |
Pre-Installed SmartSlot™ Cards | AP9630 |
Control panel | LED status display with On Line : On Battery : Replace Battery and Overload indicators |
Audible Alarm | Audible and visible alarms : configurable delays |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Physical | |
Maximum Height | 222.00 mm |
Maximum Width | 483.00 mm |
Maximum Depth | 660.00 mm |
Rack Height | 5U |
Net Weight | 97.73 KG |
Shipping Weight | 106.82 KG |
Shipping Height | 635.00 mm |
Shipping Width | 610.00 mm |
Shipping Depth | 762.00 mm |
Master Carton Units | 1.00 |
Color | Black |
Units per Pallet | 4.00 |
Environmental | |
Operating Environment | 0 – 40 °C |
Operating Relative Humidity | 0 – 95% |
Operating Elevation | 0-3000 meters |
Storage Temperature | -15 – 45 °C |
Storage Relative Humidity | 0 – 95% |
Storage Elevation | 0-15000 meters |
Audible noise at 1 meter from surface of unit | 53.00 dBA |
Online Thermal Dissipation | 430.00 BTU/hr |
Conformance | |
Regulatory Approvals | C-tick, CE, EN 50091-1, EN 50091-2, GOST, GS Mark, VDE |
Standard Warranty | 2 years repair or replace |
Sustainable Offer Status | |
RoHS | Compliant |
REACH | REACH: Contains No SVHCs |
Battery Directive | Compliant |
Other Environmental Compliance | China RoHS |
Sản phẩm liên quan
Bộ lưu điện UPS APC SURT2000XLI
Liên hệ
Bộ lưu điện UPS APC BX625CI-MS
Liên hệ
Bộ lưu điện UPS APC SURT3000XLI
Liên hệ