|Output Power Capacity||
700 Watts / 1000 VA
|Max Configurable Power||
700 Watts / 1000 VA
|Nominal Output Voltage||
|Output Voltage Note||
Configurable for 220 : 230 or 240 nominal output voltage
|Output Voltage Distortion||
Less than 3%
|Output Frequency (sync to mains)||
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
|Other Output Voltages||
3 : 1
Double Conversion Online
(6) IEC 320 C13
|Nominal Input Voltage||
50/60 Hz +/- 5 Hz (auto sensing)
|Input voltage range for main operations||
160 – 280V
|Input voltage adjustable range for mains operation||
100 – 280V
|Other Input Voltages||
|Batteries & Runtime|
|Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof||
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
|Included Battery Modules||
|Typical recharge time||
|Extended Run Options||
APC Smart-UPS RT 1000VA 230V
|Communications & Management|
DB-9 RS-232, SmartSlot
|Available SmartSlot™ Interface Quantity||
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|Emergency Power Off (EPO)||
|Surge energy rating||
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
|Shipping Weight27.80 KG||
|Master Carton Units||
|Units per Pallet||
0 – 40 °C
|Operating Relative Humidity||
0 – 95% no%
-20 – 50 °C
|Storage Relative Humidity||
0 – 95% no%
|Audible noise at 1 meter from surface of unit||
|Online Thermal Dissipation||
C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, VDE
2 years repair or replace, optional on-site warranties available, optional extended warranties available
REACH: Contains No SVHCs
|Mã sản phẩm||: Bộ lưu điện UPS APC SURT1000XLI|
|Bảo Hành||: 24 tháng|
|Tình trạng||: Còn hàng|
|Giá sản phẩm||: 13,290,000 VNĐ|
|(Giá trên chưa bao gồm thuế VAT)|
|Tặng kèm phụ kiện.|
|Số lượng mua|
|Đánh giá sao|
Bộ lưu điện UPS APC SURT1000XLI
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.