• Bộ lưu điện UPS APC SURT3000XLI

Bộ lưu điện UPS APC SURT3000XLI

Mã sản phẩm : Bộ lưu điện UPS APC SURT3000XLI
Bảo Hành : 24 tháng
Xuất xứ :
Tình trạng : Hàng mới 100%
Giá sản phẩm : 26,150,000 VNĐ
(Giá trên chưa bao gồm thuế VAT)
Tặng kèm phụ kiện.
Số lượng mua
Đánh giá sao Chia sẻ

Bộ lưu điện UPS APC SURT3000XLI

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output Power Capacity
2100 Watts / 3000 VA
Max Configurable Power
2100 Watts / 3000 VA
Nominal Output Voltage


Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load


Output Voltage Distortion

Less than 3%

Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages

220, 240

Crest Factor

3 : 1

Double Conversion Online
Waveform Type
Sine wave
Output Connections

(8) IEC 320 C13
(2) IEC 320 C19
(3) IEC Jumpers

Internal Bypass (Automatic and Manual)
Nominal Input Voltage


Input Frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input Connections

British BS1363A
IEC-320 C20
Schuko CEE 7/EU1-16P

Cord Length
2.44 meters
Input voltage range for main operations
160 – 280V
Input voltage adjustable range for mains operation
100 – 280V
Other Input Voltages

220, 240

Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules


Typical recharge time

2.50 hour(s)

RBC™ Quantity


Communications & Management
Interface Port(s)
DB-25 RS-232, Smart-Slot
Available SmartSlot™ Interface Quantity


Control panel
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO)
Surge energy rating

480 Joules

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height
432.00 mm
Maximum Width
130.00 mm
Maximum Depth
660.00 mm
Rack Height


Net Weight
54.56 KG
Shipping Weight
63.64 KG
Shipping Height
347.00 mm
Shipping Width

603.00 mm

Shipping Depth

980.00 mm



Units per Pallet


Operating Environment

0 – 40 °C

Operating Relative Humidity

0 – 95%

Operating Elevation

0-3000 meters

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95%

Storage Elevation

0-15000 meters

Audible noise at 1 meter from surface of unit
55.00 dBA
Online Thermal Dissipation

655.00 BTU/hr

Regulatory Approvals
BSMI, C-tick, CE, CSA, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, JEON, UL 1778, VCCI, VDE
Standard Warranty
2 years repair or replace
REACH: Contains No SVHCs
Other Environmental Compliance

China RoHS

Sản phẩm liên quan