• Bộ lưu điện UPS APC SURT6000XLI

Bộ lưu điện UPS APC SURT6000XLI

Mã sản phẩm : APC Smart-UPS RT, 6000VA/4200W, Input 230V/Output 230V, Interface Port DB-9 RS-232, SmartSlot, Extended runtime model
Bảo Hành : 24 tháng
Xuất xứ :
Tình trạng : Hàng mới 100%
Giá sản phẩm : Liên hệ
(Giá trên chưa bao gồm thuế VAT)
Tặng kèm phụ kiện.
Số lượng mua
Đánh giá sao Chia sẻ

Bộ lưu điện UPS APC SURT6000XLI

Availability
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
SmartSlot
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Adaptability
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output
Output Power Capacity
4200 Watts / 6000 VA
Max Configurable Power
4200 Watts / 6000 VA
Nominal Output Voltage
230V
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Less than 3%
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages

220, 240

Crest Factor

3 : 1

Topology

Double Conversion Online

Waveform Type
Sine wave
Output Connections

(8) IEC 320 C13
(2) IEC 320 C19
(4) IEC Jumpers

Bypass

Internal Bypass (Automatic and Manual)

Input
Nominal Input Voltage

230V

Input Frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input Connections

Hard Wire 3-wire

Input voltage range for main operations
160 – 280V
Input voltage adjustable range for mains operation

100 – 280V

Other Input Voltages

220, 240

Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules

2

Typical recharge time

2.50 hour(s)

Replacement Battery

APCRBC140

Replacement Battery

RBC44

RBC™ Quantity

1

Extended Run Options

APC Smart-UPS RT 6000VA 230V

Communications & Management
Interface Port(s)
DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot
Pre-Installed SmartSlot™ Cards
AP9631
Control panel
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO)

Yes

Surge energy rating
555J Joules
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height

432.00 mm

Maximum Width

130.00 mm

Maximum Depth

660.00 mm

Rack Height

3U

Net Weight
54.43 KG
Shipping Weight
63.64 KG
Shipping Height

347.00 mm

Shipping Width

603.00 mm

Shipping Depth

980.00 mm

Master Carton Units

1.00

Color

Black

Units per Pallet

6.00

Environmental
Operating Environment

0 – 40 °C

Operating Relative Humidity

0 – 95% no%

Operating Elevation

0-3000 meters

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95% no%

Storage Elevation

0-15000 meters

Audible noise at 1 meter from surface of unit
55.00 dBA
Online Thermal Dissipation

1221.00 BTU/hr

Protection Class

IP 20

Regulatory Approvals
C-tick, CE, CSA, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, UL Listed, VDE
Standard Warranty
2 years repair or replace, optional on-site warranties available, optional extended warranties available
RoHS

Compliant

REACH

REACH: Contains No SVHCs

Battery Directive

Compliant

Battery Notes

Contains Lithium Coin Cell

Other Environmental Compliance

China RoHS

Sản phẩm liên quan